SimpleTech ZeusIOPS Handbuch Seite 65
- Seite / 110
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive 63
LOG SENSE
The parameters of the table are as follows:
Bit
Byte76543210
0 Operation Code = 4Dh
1 Reserved PPC SP
2 PC Page Code
3 Sub Page Code
4 Reserved
5 (MSB)
Parameter Pointer
6 (LSB)
7 (MSB)
Allocation Length
8 (LSB)
9 Control
Name Description
PPC Parameter Pointer Control If set to 1, the device shall return parameters that have
changed since the last LOG SENSE/LOG SELECT
command. The device shall only return parameter codes
which have a value greater than or equal to the number
specified in the parameter pointer field. If set to 0, the
device will return all parameter codes greater than or
equal to the parameter pointer field. The PPC bit and the
Parameter Pointer fields are not currently supported
by the SSD.
SP Save Pages If set to 1, the device shall save the parameter values that
were requested to non-volatile memory, where the DS bit
of the parameter block is set to 1. The saving of
parameters is optional and not supported by the SSD.
PC Page Control This parameter controls what type of page values the
command is processing. Only current cumulative
values are supported by the SSD.
Page Code The Page Code and Sub Page Code fields contain the
page and subpage to which the other command bytes
apply. A page code and subpage code of 0 specify that
the command bytes apply to all pages and subpages. A
value of FFh in the Sub Pages field denotes the command
bytes apply to all subpages of the specified page;
otherwise, specific pages and subpages must be
specified.
Sub Page Code
Allocation Length The Allocation Length field requests the maximum
number of bytes to transfer.
Control The Control field is present for all SCSI commands. It
is not relevant and is not supported by any SSD
command.
- Fibre Channel 1
- 3.5-Inch Solid State Drive 1
- Product Manual 1
- Trademark Information 2
- Disclaimer of Liability 2
- Copyright Notice 2
- CONVENTIONS 3
- REVISION HISTORY 5
- TABLE OF CONTENTS 7
- LIST OF TABLES 13
- LIST OF FIGURES 17
- OVERVIEW 19
- AUDIENCE 19
- REFERENCE DOCUMENTS 20
- PRODUCT DESCRIPTION 21
- PERFORMANCE CHARACTERISTICS 22
- MOUNT TIME 23
- ACCESS TIME 23
- DATA TRANSFER RATES 23
- ERASE TIMES 24
- SANITIZE 24
- HOT PLUGGING 25
- PREVENTATIVE MAINTENANCE 25
- ELECTRICAL SPECIFICATIONS 26
- GROUNDING 27
- FAULT LED OUT SIGNAL 27
- READY LED OUT SIGNAL 27
- SEL_ID FUNCTION 28
- P_ESI_n FUNCTION 29
- START_n MATED 30
- -DRIVE PRESENT 30
- DEV_CTRL_CODE_X 30
- INTERFACE SPECIFICATIONS 31
- SCA-2 INTERFACE CONNECTOR 32
- CONNECTOR LOCATION 32
- CONNECTOR PINOUT 33
- VOLTAGE AND GROUND SIGNALS 33
- FC-AL FEATURES 34
- FCP-SCSI COMMANDS 35
- EPORT LUNS (A0h) 37
- EST UNIT READY COMMAND (00h) 38
- ORMAT UNIT (04h) 38
- EASSIGN BLOCKS (07h) 39
- EAD (6) COMMAND (08h) 40
- RITE (6) COMMAND (0Ah) 40
- NQUIRY COMMAND (12h) 41
- ODE (6) SELECT (15h) 43
- ODE (6) SENSE COMMAND (1Ah) 44
- TART/STOP UNIT (1Bh) 45
- END DIAGNOSTIC (1Dh) 48
- EAD CAPACITY (25h) 48
- Table 29. Read Capacity CDB 49
- READ (10) EXTENDED (28h) 50
- RITE EXTENDED (10) (2Ah) 51
- RITE AND VERIFY (10) (2Eh) 51
- ERIFY (10) (2Fh) 51
- RITE BUFFER COMMAND (3Bh) 52
- EAD BUFFER (3Ch) 53
- EAD (10) LONG (3Eh) 54
- RITE (10) LONG (3Fh) 54
- YNCHRONIZE CACHE (10) (35h) 55
- EAD (10) DEFECT DATA (37h) 55
- RITE (10) SAME (41h) COMMAND 56
- OG SELECT COMMAND (4Ch) 56
- OG SENSE COMMAND (4Dh) 57
- ODE (10) SELECT (55h) COMMAND 58
- ODE SENSE (10) COMMAND (5Ah) 59
- UNSUPPORTED COMMANDS 61
- SMART SPECIFICATION 62
- DIAGNOSTICS 63
- SCSI IMPLEMENTATION 63
- EVENTS CURRENT VALUES 64
- LOG SENSE 65
- LOG SELECT 66
- SUPPORTED LOG PAGES 67
- LOG PAGE 2H - WRITE ERRORS 68
- LOG PAGE 3H - READ ERRORS 69
- VENT NOTIFICATION VIA SCSI 72
- Byte76543210 74
- Table 46 76
- FIBRE CHANNEL STANDARD 77
- FABRIC NODE CONNECTION 79
- Table 47. FCP Function Levels 81
- PHYSICAL CHARACTERISTICS 82
- EXTERIOR DIMENSIONS 83
- ENVIRONMENTAL CHARACTERISTICS 84
- AXIMUM COMPONENT TEMPERATURES 85
- ELATIVE HUMIDITY 86
- LTITUDE PARAMETERS 86
- HOCK AND VIBRATION 86
- AILURE CRITERIA 86
- OPERATING SHOCK AND VIBRATION 87
- DROP TESTING 87
- INSTALLATION 88
- DRIVE CONFIGURATION 89
- FAULT SIGNALS 89
- OWER-ON FAULT CONDITIONS 90
- PERATIONAL FAULT CODES 91
- DRIVE ORIENTATION 93
- PRIMARY HEAT GENERATION AREA 94
- COOLING REQUIREMENTS 95
- MOUNTING DIMENSIONS 96
- DRIVE INSTALLATION 97
- GROUNDING REQUIREMENTS 97
- MICROSOFT OS COMPATIBILITY 98
- SSD MANAGEMENT UTILITY 99
- DIAGNOSTIC SOFTWARE 99
- REGULATORY COMPLIANCE 100
- RADIO FREQUENCY EMISSIONS 101
- EMI TEST SITE CORRELATION 101
- VERIFICATION SAMPLES 101
- VERIFICATION TESTING 101
- ELECTROSTATIC DISCHARGE (ESD) 102
- Contact Information 103
- Ordering Information 103
- 102 Zeus 104
- 104 Zeus 106
- Regulatory Compliance 107
- SCSI Commands 107
- SMART Specification 107
- Unsupported SCSI Commands 108
- Warranty 108
- CERTIFICATION AND WARRANTY 109
- 61000-04522-101: Revision 1.6 110
Verwandte Produkte und Handbücher für Vernetzung SimpleTech ZeusIOPS
(0 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.165 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern